SELDEN SELGIENE SURFACE AND FLOOR CLEANER SANITIZER, Ideal for catering or kitchens, 5 Litre, C020

Product Details

High performance dissipative floor polish. Retains performance even at humidities as low as 11% Independently tested to IEC 61340 - 4 - 1 and BS 7506. Makes charge dissipate off a standard vinyl floor. Improves the conductivity of conductive flooring. Applies, hardens and protects like a normal floor polish. Non-slip

Application: For all linoleum, P.V.C., rubber, sealed cork, sealed wood, terrazzo and thermoplastic floors. N.B. Not suitable for unsealed wood, unsealed cork or laminate flooring. 

Directions: Selstat must be applied to a clean grease free floor. Strip old polish with Selate then rinse thoroughly with clean water, allow floor to dry. Apply a thin even film of Selstat using a clean lint free mop or applicator. Apply a second coat when the first is dry (approximately 30 minutes). COVERAGE: 60 square metres per litre. N.B. Buffing is not recommended as this will reduce the static dissipative property of the polish. 

Size: 1x5L

Downloads

• Information - INFO_C020-5LX2-SELDEN.pdf

• Safety Data Sheet - SELDEN_C020_C020.pdf